Wardrobe Knowledge School: Ten points method to identify the wardrobe material

[ Chinese wardrobe net ] 1. Plate material: The surface of the plate is made of melamine veneer. It does not need paint, the surface is fine, the structure is flat, the texture is hard, and the anti-mite flame retardant is called “defect-free plate” in foreign countries. The middle part of the substrate is medium density board, the density can not be lower than 0.80g/cm3, otherwise the bearing capacity and flatness will be affected; the water content can not be lower than 6.5%, but it should not be too high, otherwise it cannot adjust itself according to the change of climate; Surface technology, by hand touch to distinguish whether it is embossed surface or flat, the relief surface is the best; formaldehyde emission 1.1mg / L, to achieve European E1 standard, and test reports, alert to particle board, dyed moisture-proof board. In addition, good plates have anti-ant, anti-mildew and other functions.

2. Anti-counterfeiting of the board: There are brand logos on both sides of the embossed board and the edge-sealing position.

3. Smell the smell, soak the water test (too fast and not to be lifted).

4. Edge sealing: Whether it is smooth, delicate, and strong adhesion (pseudo-deterioration process carefully cracking).

5. The table should be like one: look at the material in the side plate hole. Of course, be careful of the material inside the cabinet side panel and the solid board and the laminate (four sides) without punching.

6. Standard specification plate: There are standards, processes and precision to ensure.

7. Aluminum alloy sliding door frame material: see the cross section is bright and smooth without burr, the minimum wall thickness is required to reach 1.1mm; 8. Whether the key hardware accessories are branded with their own brand anti-counterfeiting marks, and the weight (such as drawer guides, etc.) ).

9. Push and pull the sound to judge the quality of the pulley, but not to say that the sound is as small as possible (may be engineering plastic or nylon); whether the upper rail guide wheel has an adjustment function.

10. In short, carefully understand the sample to prevent consumption traps.

Steel Sculpture

We are a reputable manufacturer creating various kinds of indoor and outdoor railings, fire pits, BBQ grills, façade elements, and floral arrangements.
pots, sculptures, and other specialized items made with CNC equipment. Corten wire is used in the welding of every junction. Remember that we offer a pre-weathering service and that we may give a bespoke service on Corten Steel; if you have a unique need, contact us here! Did you realize? Get in contact with us right now for a free price! We can make corten steel in any custom size or share you require.
-Constructed with Corten Steel
-Natural patina of rusty finish
-H 1500mm ( may be made 5ft high) ( can be made 5ft high)
- Handmade object
- Also available in an aluminum and stainless steel variant
- As the sculpture is left out in the elements, its patina will deteriorate and cure over time.

Packing

Packing will by pallet/carton/ wooden box,according to different demand.

Steel Sculpture,Steel Garden Art,Metal Garden Sculptures,Metal Art Garden

Henan Jinbailai Industrial Co.,Ltd , https://www.jblbbqgrill.com