[ Chinese wardrobe network ] In the wardrobe industry, this problem will make many customers entangled. How to choose is good? Xiaobian analysis hopes to help you! In order to really make this problem clear, it needs to be deeply analyzed from several aspects such as material selection system, product positioning and customer positioning. Simply saying that a custom closet is good, or that making a closet on the spot is not a strict statement. Custom wardrobe renderings First, the selection of materials: The basic materials for making wardrobes are roughly divided into five types: one is granular sheet, the other is multi-layer sheet, three joinery sheet, and the fourth is solid wood sheet. Granular sheet: There are a variety of sub-names, such as MDF, MDF, high density board, solid wood particle board, particle board, moisture board and so on. According to the different manufacturers, the quality will have advantages and disadvantages. The production process is based on wood fiber or other plant fiber. After breaking, fiber separation and drying, urea-formaldehyde resin or other adhesive is added and hot pressed. Artificial panels made after sealing. The utility model has the advantages that the cost is slightly lower, the flatness is good, the sealing of the machine is stricter, and the surface layer is made of a paint-free layer. If it is used for a cabinet such as a wardrobe or a cabinet, the paint can be dispensed with, and the cost is low. Most of the panel-type finished furniture on the market currently uses such panels. The disadvantage is that the raw materials of powder or granules must be glued with more glue, that is, the use of highly environmentally friendly glue, because of the large amount, the environmental protection is low. If the top layer and the side strips are well sealed, the formaldehyde emission can be effectively avoided, and if the sealing is not good, harmful gases will be emitted for a long time. Second, the nail strength is not good, and the screw can not be tightened after loosening. Third, the weight is greater. It is mostly used for engineering decoration. It is recommended to avoid using it when decorating the home. If due to financial reasons, try to choose a regular manufacturer. Need to say that the so-called moisture resistance of this board depends on its own sealing, which itself is not moisture-proof and highly absorbent. Multi-layer board: Multi-layer board is made of three-layer or multi-layer veneer or thin board through high-temperature and high-pressure board glue. It is a multi-layer wood board with vertical and horizontal staggered as base material, supplemented with polymer glue, surface. It is made of solid wood or melamine fabric and pressed. It has the advantages of granular plate, because the amount of glue is less, it is higher than the granular plate in the environmental protection grade. Because the wood fiber is stacked vertically and horizontally, there is no problem in the nailing force, the price is higher than the granular plate, and the waterproofness is better, not easy. Deformation. Joinery sheet: The market is divided into two major types, matte finish and melamine finish. The internal structure is a single layer of wooden slats of equal width (straight seam splicing and trapezoidal splicing, the latter has better stability and nailing power), the plywood surface is pressed, the amount of glue is less, and the environmental protection grade Higher. There are existing advantages of particle board and multilayer board. If you choose a matte sheet, you need to stick the panel and spray the paint. At present, the ecological board with melamine surface will become a better trend. Its water resistance and stability are better, and the price is slightly higher than the first two plates. It should be pointed out that the above three kinds of plates are only suitable for the production of plate-type furniture. It is necessary to have a molded groove shape on the door panel of the door, and a more delicate model is difficult to realize. Solid wood panels: According to the different wood materials, there are many kinds of products that can be seen on the market, such as fir boards, eucalyptus boards, oak boards, etc. The common feature is that the inner and outer textures are the same, and the whole piece of solid wood slats is made by delicate jagged splicing and pressing. Because these kinds of plates are made of pure solid wood, the content of glue is very little or not, the environmental protection grade is very high, and it can be made into many fine carvings and crafts, which are high-end products in the plate. Log board: pure log material, no splicing. It belongs to luxury jewelry. Generally, only the finished log furniture can be seen on the market, which has a strong appreciation value, but the price is a bit high. Second, the advantages and disadvantages of custom wardrobe. The materials used are paint-free particle board or paint-free multi-layer board. Advantages: the surface layer is paint-free, the machined production has high precision, and the snap-type or self-tapping device is more convenient to connect and disassemble. Disadvantages: poor adhesion to the wall and easy to shake. Third, the advantages and disadvantages of making wardrobes on site. When using a paint-free particle board or a paint-free multi-layer board to make a wardrobe, in addition to being able to closely integrate with the site location, it should be inferior to the custom wardrobe under the material system. If the building space is relatively wide, it is recommended to use a custom closet. If the space is irregular or it is a recessed space, it is recommended to make it on site. When using solid wood panels to make wardrobes, because there is no need for edge banding at the corners, you can even make curved processing. The door panels can even add delicate lines according to the decoration style, which can make the finished wardrobe more refined and coordinated. On the other hand, if you choose oil-based paint or even water-based paint with high environmental protection, you can take care of the environment and make the paint of the wardrobe full. It is better than the paint-free surface. It is superior to paint-free particle board or paint-free multi-layer board due to the higher quality of the inner material and the outer paint surface. in conclusion: Different results will result from different choices of basic materials. If the paint-free particle board or the paint-free multi-layer board is used, it is better to use the finished custom wardrobe when the price is not much different, which is suitable for ordinary household use. If you want to improve the quality, upgrade the environmental protection, materials, perception and other indicators, it is recommended to use solid wood sheet on-site production, but must have a good construction master and environmentally friendly paint to support the support. Three years ago, solid wood panels and environmentally friendly water-based paints were not seen in the mainland market, so hand-made wardrobes could not compete with custom wardrobes. Now, with the combination of material advantages and personalized decoration, solid wood wardrobes are superior to custom wardrobes. If the price is not much different, it is recommended to choose a solid wood wardrobe made on site. Suitable for middle and high-end customer groups. There is also a case where there is a finished wardrobe on the market, which uses solid wood materials and spray paint. The price varies greatly depending on the wood. If the consumer can accept the price, this wardrobe is of course the most obvious wardrobe. When choosing this type of wardrobe, consumers must brighten their eyes. Many of them will pretend to be solid wood materials with solid wood skin materials to avoid being deceived.
item :3-way concealed adjustable hinge
material :zinc
capacity :40kgs/60kgs/80kgs/100kgs/120kgs/200kgs
Door Hinges,Cabinet Hinges,Cabinet Door Hinges,Concealed Door Hinges Wenzhou Zhaoxia Hardware Co.,Ltd , https://www.zhaoxiahardware.com