How to measure the custom wardrobe measurement method

[ Chinese wardrobe network ] [Chinese wardrobe network ] How do you think the custom wardrobe should be measured? To know the answer to this question, take a look at the wardrobe measurement method with the Chinese wardrobe net! I believe that you can customize the wardrobe through the understanding of these contents. When you know the measurement method.

First, the custom wardrobe preparation before the measurement

1, measuring tools

Main measuring tool: 5M-7.5M steel tape measure

Auxiliary measuring tool: 10M-20M leather tape measure

Essential tools for paper, drawing pens and other recording data

2. It is clear that the customer has completed all the decoration of the wardrobe installation area, including the floor, wall, ceiling, etc.

Custom wardrobe design

Second, custom wardrobe measurement methods

1, three-sided measurement

The "three-sided measurement method" is a plane measurement method, a facade measurement method, and a facade side view measurement method. In the measurement process, you need to draw a sketch of the plane and elevation layout with a paper and pen, and then measure the size. The higher the accuracy of the measurement size, the better, and the error is not more than 3mm. The measured data is recorded on the sketch and clearly marked. There must be no missing or unmeasured areas. Multi-point measurement is required for the measurement.

2, sliding door hole size measurement method

The dimensions of the sliding door opening should be accurate plus or minus 2mm. Only the correct size can produce the sliding door of the right size, in order to make the production more correct, the installation is more convenient, and avoid unnecessary loss. The door hole size measurement method is as shown in the figure below. The multi-point measurement method such as height H1, H2, H3, width W1, W2 is used to measure the accurate sliding door hole size.

3, multi-point measurement method

The multi-point measurement method, also known as the three-point measurement method, obtains accurate data through multi-point measurement, and measures the room size without a doubt.

Robots Bubble Wand

Robots Bubble Wand,Bubble Making Machine,Bubble Maker Toy,Handheld Bubble Machine

Shantou Chenghai LeTime Trading Co., Ltd , https://www.letimetoys.com