[ Chinese wardrobe network ] First, the plate The board is the main component of the overall wardrobe , and its quality directly determines the quality of the product. The wardrobe panels on the market mainly use wood-based panels, while the use of solid wood is rare. Wood-based panels are further divided into splints, particle boards, and fiberboard. Among them, fiberboard has high density, medium density and low density. 1. High-density board: It is made of wood fiber or other plant fiber. After cooking, it is ground into fine fiber and added with appropriate amount of adhesive. It is pressed under a certain temperature and pressure. High density and high strength. At present, high-density boards have become the main material of most wardrobe manufacturers. 2. Particle board: It is made by processing wood into fine particle shavings and adding appropriate amount of glue, which is pressed under a certain temperature and pressure. The density is not high and the strength is small. 3. Melamine board: The melamine impregnated paper is directly pressed against the particle board and the high density board. This plate is divided into two levels, E1 and E2. Second, the standard of judging the quality of the board 1. Look at the panel of the wardrobe whether it is a high-density board or a particle board. The method of judging is that the fine fibers inside the high-density board are tightly combined, and the density is large and heavy. The high-density board can withstand large pressure and has a long service life; while the fine particle structure of the particle board is not tight enough, even small pores can be seen, it is lighter in the hand, the gravity is small, and the service life is short. 2. See if the sheet substrate is environmentally friendly. As long as the content of free formaldehyde in the board is ≤9mg/100g, that is, the European E1 environmental protection standard, it is not harmful to human health. The most direct way is to open the door, open the pumping session, if there is a strong irritating smell, and even make people cry, indicating that the formaldehyde content exceeds the standard; the second is to look at the merchant's material testing certificate to see if it holds the relevant national wood-based panel quality. Inspection certificate of the testing center. 3, see if the plate is real material. In order to reduce costs, some small manufacturers currently on the market usually sell dog meat and deceive consumers. The thickness of the standard cabinet body is 18mm, and the small manufacturers generally use the particle board as a high-density board to promote the board thickness of 16mm, and the consumer said that the board is 18mm. The thickness of the back plate is generally 9 mm, and the thickness of the door plate is 9 mm. Daybed Benches,Sponge Daybed Benches,Living Room Daybed Benches,Stain Proof Daybed Benches INCHEE FURNITURE CO.,LTD , https://www.incheehome.com