Whether it is water supply, drainage, heating, gas supply pipelines and long-distance oil and gas pipelines in the city, or process pipelines in the factory, it is an important equipment for urban safety. Use thermal imaging cameras to detect pipeline blockage, thinning, corrosion, leakage, etc., to avoid damage to the environment and personnel; you can also use the thermal imager to detect and evaluate the insulation of the pipeline, thereby reducing energy consumption and achieving energy savings. . Pipe insulation Heat insulation Application of infrared camera in detecting pipeline 1 The pipe is blocked. The temperature difference is caused by the difference in heat capacity between the blockage and other parts. When these temperature differences are transmitted to the pipeline casing, the infrared camera can be used to detect the fault outside the pipe. 2 The inner wall of the pipe is thinned by wear or corrosion, and its temperature is higher than the temperature of the normal part, so that the fault can be detected. 3 Due to the large fluctuation of local temperature, the material will cause cracks and leakage due to thermal fatigue of the material. The fault will leak the medium in the pipeline. If the medium in the pipeline is low temperature medium (such as ammonia) or high temperature medium, the pipeline leakage medium and pipeline The temperature difference on the outer wall is different, and the infrared camera can be used to detect the malfunction. 4 The pipe insulation is off, and the temperature at the falling point is too large, which can be clearly displayed in the thermal image. The thermal imager can also detect the temperature of the pipeline as a basis for judging whether the insulation has reached the specified effect. 5 The heat exchanger tube is clogged or leaked, which causes the heat exchange efficiency to decrease, affecting normal production and causing energy waste. The thermal imager can be used to check for faults. 6 Heating furnace or reactor tube working in high temperature and high pressure and corrosive environment will cause hot spots, cracks, carburization, oxidation, thermal cracking, thinning, etc., which seriously affect its service life. Using the infrared thermal imager to test the furnace tube in the furnace through the peephole, the thermal image of the fault can be obtained, which provides a basis for the implementation of the maintenance furnace tube. Leakage between the pipeline and the bracket weld Pipe gambling Steam line insulation damage Pipe thinning Typical customers: Petrochemical industry: Zhangzhou Juhua, Dushanzi Petrochemical, Yangzi Petrochemical - BASF, etc. Pharmaceutical industry: Johnson & Johnson Pharmaceuticals, etc. Metallurgical industry: Wuhan Iron and Steel Company, Maanshan Iron and Steel Company, Anshan Iron and Steel Company, etc. Sofa Bed,Conversible Sofa Bed,Space Saving Sofa Bed,Corner Sofa Bed Kaifeng Lanwei Smart Home Co., Ltd , https://www.sofas-world.com
