Before the end of the Children's Day on June 1st, let's look at a set of data. A few days ago, "Consumer Report" made a list of 20,197 children's products published by 126 industrial and commercial and quality inspection departments across the country, and made a black list warning of unqualified brands. In this group of data, the child safety seat's failure rate is 50%, which is particularly dazzling. Let's look at a set of data. Individual children's products brands, as well as some car brands, are in the forefront. According to statistics, these unqualified child safety seats, mainly due to fuel characteristics and other problems, were unqualified. Among them, the unqualified marks accounted for 9.09%, the combustion characteristics accounted for 9.09%, and the specifications accounted for 81.82%. The instructions are not qualified? This reason is a bit strange. The relevant person in charge of the AQSIQ has publicly pointed out that the importance of the logo and manual for children's car seat products is different from other commodities. There are many types of children's car seats in the market. The children's groups are not the same as the installation methods. Most ordinary consumers can't install them correctly without professional guidance, and they can't correctly distinguish children of different heights and weights. The installation constraints that should be used, without proper installation and use, may result in serious safety hazards. Nowadays, many people have such a consumption habit and think that importing things is good. However, according to the “2016 White Paper on the Quality of Imported Children's Car Seat Products†issued by the General Administration of Quality Supervision, Inspection and Quarantine (hereinafter referred to as the “White Paperâ€), perhaps these people need to change this consumption habit. In 2016, a total of 881 batches of products imported through conventional channels such as general trade were inspected on-site. It was found that 115 batches of products were not qualified for manufacturing assembly or labeling, and the unqualified rate was 14.18%. Room testing, the detection of 27 batches failed, the failure rate was 32.53%, of which 7 batches of quality and safety projects failed, the failure rate was 8.43%. There are also many unqualified quality safety items for imported child safety seats. In 2016, the quality inspection department conducted a total of 83 batches of imported child car seat products, and detected 27 unqualified products, involving 25,000 products. Among them, the quality and safety projects failed 7 batches, totaling 2,698 units, involving unqualified items including combustion performance, corrosion resistance, and unsatisfactory dynamic tests. Other reasons for non-conformity are mainly due to poor manufacturing or assembly of goods, no Chinese mark on the package, no warning labels, installation instructions and instructions for use, and lack of 3C certification mark or the certificate content does not match the actual product model. The unqualified products involve products from Germany, Italy, France and other countries. The brands involve Porsche, RECARO and other international famous brands. If you are still unmoved after reading the series of cold ice above, continue to look down. According to statistics from the AQSIQ Defect Management Center, traffic accidents are an important cause of child casualties in China. Studies have shown that child safety seats can reduce 71% of fatal injuries and 67% of serious injuries in children, that is, only A safety seat can avoid most serious injuries. Don't think this is sensational, because it has been verified! According to US survey data, the child restraint system saved at least 8,959 children from 1975 to 2008 since the mandatory child safety regulations were enacted in 1971. I would like to remind everyone that because the logo and instructions are different from other products, for children's seats, different groups or different weights of child seats may have different installation methods and binding methods, once this installation method and restraint The method is inconsistent with the manual, then the protection function of the child seat may not be fully utilized, and the expected design effect is not achieved. Special attention should be paid when purchasing, whether the product has a Chinese manual, whether the installation method is photo or very clear. Shown by the illustration.
Patio
dining table set creates an immensely striking, comfortable and durable place
to relax and dine. The rattan weaving finish of the all-weather wicker is
complemented by a hidden rust-resistant, powder-coated aluminum frame. A thick
layer of tempered glass protects and reflects on the intricate weave below.
-Part
of the Hyde Park
Collection.
-Modern,
clean lines and a fresh, squared shape
-Richly
different color fibers
-Handwoven
premium resin wicker
-Rust-resistant
powder-coated frame
-If
you want,can add umbrella hole with cap
Patio
dining table set has many options. Round table, Square table and rectangle
Patio Dining Set, You can be free collocation by yourself with armchair or
armless chair.
About
us:
1.our
factory is more than 20000 square meter big.
2.
Our showroom is about 800 square meters.
3.
we have professional sale team and more than 200 workers.
4.
The capacity of our factory is 60 containers/month.
5.
we attended CIFF furniture fair and canton fair.
Welcome
your further inquiry for further discussion, also welcome to visit our factory
to talk face to face.
Dining Patio Table Set,Rattan Dining Table Set,Wicker Dining Table Set,Outdoor Dining Table Set Golden Eagle Outdoor Furniture Co., LTD. , https://www.geoutdoorfurniture.com
