LX-C Shore Hardness Tester (Special Offer) LX-C Microporous Material Hardness Tester (Special Offer) is a rubber-plastic micro-container made of foamed plastic with a stress of 0.5kg / cm2 or more when the compression rate is 50%. The hardness of the hole material can also be used for other materials of similar hardness. This meter can also be called Asker-C type rubber hardness tester. This meter device can measure the standard hardness in the laboratory on the supporting load measuring rack of the same model, and can also be handheld Hardness meter measurement. This hardness tester implements HG / T2489-93 standard. LX-C type microporous material hardness tester is used to measure the hardness of rubber and plastic microporous materials made of foamed plastic with a stress of 0.5kg / cm2 or more at a compression rate of 50%. It can also be used for other materials of similar hardness. It can also be called Asker-C type rubber hardness tester. This device can measure the standard hardness in the laboratory on the supporting load measuring rack of the same model. It can also be measured with a hand-held hardness tester. This hardness tester implements HG / T2489-93 standard. 1. Dial value: 0-100HW Other related hardness testers: hardness tester: Rockwell hardness tester: Brinell hardness tester: Vickers hardness tester: Shore hardness tester Water flosser dental hygiene,Dental Oral Irrigator,Water flosser teeth whitening,Water toothpick,Water pik Shenzhen Shengkang Electronic Technology Co.,Ltd , https://www.shk-beauty.com
Overview of LX-C microporous material hardness tester
2. Needle stroke: 0-2.5mm
3. End pressure of pressing needle: 0.55N-8.06N
4. Pressing needle spherical surface: φ5mm