The film coating effect is not only related to the process of coating the raw materials and the laminating operation process, but more importantly, it is also related to the condition of the ink layer of the printed matter. The condition of the ink layer in the printed matter is mainly determined by the properties of the paper, the ink properties, the thickness of the ink layer, the area of ​​the graphics, and the integrated density of the printed text. These factors affect the forming conditions of the bonding force of the bonding machine, the binding force of the physical chemistry, and the like, and thus cause Changes in the adhesive properties of printed surfaces. 1. Print ink layer thickness. Ink layers with thick solid prints are often difficult to bond with plastic films and will soon delaminate and foam. This is because a thick layer of ink changes the porous surface characteristics of the paper and closes the pores of the paper fibers, which seriously impedes the penetration and diffusion of the adhesive. The penetration of the adhesive to a certain extent is advantageous for the adhesion of the coating. In addition, the print surface ink layer and ink layer are different, the adhesive wetting properties are also different. Experiments show that with the increase of the thickness of the ink layer or the increase of the area of ​​the image, the surface tension value is significantly reduced. Therefore, both monochromatic printing and multicolor printing are sought to control the ink layer to a relatively small degree. The thickness of the printing ink layer is also directly related to the printing method. The printing method is different, and the ink layer thickness is also different. For example, the thickness of the ink layer of a lithographic product is approximately 1 to 2 μm, approximately 2 to 5 μm for embossing, and 10 μm for gravure printing. From the laminating point of view, the plain print is ideal and its ink layer is very thin. 2. The type of printing ink. The printed products that need to be covered should be fast-fixed bright offset inks. The binders of the inks are composed of synthetic resin, dry vegetable oil, high-boiling kerosene, and a small amount of gum. Synthetic resin molecules contain polar groups, and polar groups can easily diffuse and permeate with the polar groups in the adhesive molecules, and produce cross-links, forming physical and chemical binding force, which is conducive to coating; fast fixing This photo offset ink also has the advantage of quick drying of the ink layer after printing, and is also very beneficial to the coating. However, it is not advisable to put too much driers when using it. Otherwise, the surface of the ink layer will crystallize, which will affect the film coating effect. 3. The use of ink thinners. The ink diluting agent is a kind of substance that can make the color of the ink lighter. Commonly used ink diluting agents include white ink, weili oil and bright oil. White ink is a kind of ink, composed of white ink pigments, binders and auxiliary materials. It is commonly used for light-color solid printing, spot color printing, and trademark pattern printing. The inferior white ink has obvious silt particles, which are not tightly combined with the binder. After the printing, the binder will penetrate into the paper quickly, and the pigment will float on the paper and hinder the adhesion. This means that some light-colored solid prints are often woody. The cause of the film. The ink should be carefully selected before printing, and the self-inking agent with uniform fineness and no obvious particles should be used as a diluting agent. Virgin Oil is a paste-like transparent body made by dispersing and rolling aluminum hydroxide and dry vegetable oil. It can be used to increase the luster of the printed surface and has excellent printing performance. However, the aluminum hydroxide is light and will float on the surface of the ink layer after printing. When the film is coated, an invisible barrier layer is formed between the adhesive and the ink layer, resulting in poor adhesion or foaming. It is slow to dry and has the property of inhibiting the drying of ink, which is also difficult to adapt to the film. Bright oil is a fast drying agent from inside to outside. It is a colloidal transparent material made of resin, flat vegetable oil, and driers. It has a fine texture, a bright film, and a good affinity. It can firmly adsorb the polypropylene film on the surface of the ink layer. At the same time, bright oil can make the prints glossy and dry faster, printing performance is good. Therefore, it is the ideal ink thinner. 4. The addition and release of dusting. In order to adapt to high-speed multi-color printing, offset printing process is often used to solve the drawbacks of the back of the dirty. Spraying is mostly composed of cereal starch and natural suspended substances. The anti-sticking effect of dusting is mainly to form an irreversible mat on the surface of the ink layer, thereby reducing adhesion. Due to the coarse particles, if excessive dust is sprayed during the printing process, these particles float on the surface of the printed product. When the film is coated, the adhesive is not adhered to the ink layer at every place, but is bonded to this layer of dusting powder, thus causing falsehood. Viscosity has seriously affected the quality of the coating. Therefore, if the printed product needs to be coated, the amount of dusting should be controlled as much as possible during printing. The poor drying of the ink in the printed matter has a great harm to the quality of the film. The factors that affect the drying of the ink layer, in addition to the type of ink, the amount and type of driers in the printing process, and the ambient temperature and humidity between printing and storage, the structure of the paper itself is also very important. If the structure of coated paper and offset paper is different, the drying condition of the ink layer is also different. Whether it is coated paper or offset paper, the film is covered when the ink is not completely dried, and the influence on the quality of the coating film is unfavorable. The high boiling point solvent contained in the ink can easily cause the plastic film to expand and elongate, and the expansion and elongation of the plastic film is the most important reason for the blistering and delamination of the product after the coating.
Multipurpose Plastic Storage Container
Carefully designed to fit as much possible storage space. These plastic organizer bins are great for the kitchen, pantry, bedroom, bathroom, laundry, and other areas. Conveniently store and organize food, medicine, bottles, and other items here.
Sturdy Construction Household Storage Containers
These organizing storage bins are made of shatter-resistant plastic and are BPA-free, making them particularly durable and family-friendly. No need to be anxious about storing food in the refrigerator because these containers are food safe and can be cleaned with mild soap and water.
Aesthetic Household Storage Supplies
Our organizing bins are modern and minimalist. They have a clear open-top design that makes the search process more manageable because the desired goods are plainly visible. These storage containers allow you to maximize space in any situation by providing effortless organization.
Easy-grip Household Storage Bins
We're all about making your life easier, so we made our storage bins with built-in side handles, making it simple to lift, slide, and move from one spot to another. They also have rounded edges that are great for quickly getting a good grip when organizing.
Transparent Container,Plastic Transparent Container,Transparent Container With Lid,Transparent Airtight Container
NINGBO NEWMORE IMP. & EXP. Co., LTD. , https://www.newmoreclean.com