Spoon For Hot Pot,Soup Shell Spoon,Metal Soup Shell Spoon,Spicy Spoon For Hot Pot Huayao Master (Puyang) Automation Equipment Co., Ltd. , https://www.huayaomaster.com
The use of the textual power of the user greatly solves the disadvantages of inconsistency, low productivity, high labor intensity, and high repetition, which were previously caused by artificial hand-folding and artificial imposition. In particular, with the rapid development of computer-to-plate (CTP) technology, the use of traditional software film collages to achieve hand-folding and imposition, and the use of automatic folding software and imposition software must be used. Xia Feng gives an example of how to use the body text for folding and imposition processing.
First, carry out the operation assuming that there is now a 64-page Feiteng paper magazine to be folded output, this magazine's finished product size is 180MM × 260MM, saddle stitches, now start from scratch.
1. Set up the template template parameter settings as shown in Figure 1. There are two rows and two columns in the large version. The page margin is the position left for the marker. This parameter can be set high according to the added marker. If you don't add any flags, you can set all margins to 0.
2, set the page number and side blank According to the experience of the layout, the width of the general fold is set to 0, and the value of the cut for each page is set to 3. Since the horizontal cut in the middle includes the cut values ​​for the upper and lower pages, set it to 6, as shown in Figure 2.
3, set the tag First click the M button in the toolbar, from page editing mode to mark mode, so you can add a tag. The user can select a variety of marks, such as: alignment marks, crop marks, fold marks, color bars, comment bars, and the like.
4. Save all settings and use this template when creating jobs.
5, set up the operation According to Figure 3 set the parameters, in which the number of grams of paper or thickness is used to calculate the amount of creep, the greater the amount of potato Zhang more creep. Bleeding control can control the value of bleeding, usually choose bleeding to fold, that is, the amount of bleeding can be up to the edge. If the center of the hem is 0, the bleeding value is also 0. If the value of the hem is 3 mm, the maximum bleeding value is 3 mm. Bleeding control can also be specified by the user.
6. Make a handoff and select the template you just created. The new job will be completed. The job then is to select the source file to be folded. The user can scan to determine the page number, height, and width of a source file. If you set more pages than the job's page number, you will find a warning, but you can continue. If the page number of the source file is less than the set page number, the program reports an error and cannot continue working. If there are not so many pages, you can add a blank page to make up. Finally, the PS output version can be made.
Second, to make imposition operations Imposition operations and folding operations similar to the first to create a template, and then create a job, select the template in the job inside. Figure 4 is a schematic diagram of adding a small page.
The difference between the imposition setting and the folding setup is not too different. The position of the small page can be arbitrarily placed. The area of ​​the blue color in Fig. 4 is the size of the printing center, which is the value of the large printing size minus the page margin. The set mark is placed in the interval between the printing plate and the large printing plate. It should be noted that the small page should not exceed the version of the edition, otherwise it will report an error.
In the syndication 1.1, the imposition function was added. For the files generated by Winsor and Feiteng, all the files in the file can be copied to the directory of the person's PS file. With this feature, pictures in the PS file can be conveniently collected for remote transmission to the remote site and output using RIP.
The convenient use of the text in combination with the user's needs is very suitable for the situation of the Chinese printing industry. It will completely eliminate the artificial hand-offs and impositions, and greatly increase work efficiency. It provides an effective solution to ensure high-quality printing.
The square text combines folding and imposition processing
Fang Wenhe is the newest hand-down imposition software launched by Beijing University Founder in May 1999. The latest version is 1.1. There are two main functions in the text: folding and imposition. For a multi-page publication, in the production of prints, it is necessary to make a large version of each production in a specific manner in accordance with the location of the celebration, so that after printing, it can be folded and can be bound in a pre-selected page order. The folding function of the square text is designed to achieve the above requirements. The imposition is a version of a small page in accordance with a certain direction and scaling into a single-page version of the general application of folding in the printing of books and magazines, the imposition is generally used in the printing of advertising and newspapers.