What is the function of eyeshadow Eyeshadow,Eyeshadow Palette,High Pigment Eyeshadow Suzhou Yimeijia368 Biological Technology Co.,Ltd. , https://www.yimeijiabeauty.com
1. Proper use of eye shadow can make your eyes more attractive, bigger and more beautiful, and make the whole makeup look three-dimensional and have the role of finishing touch.
2. In addition, when painting some special makeup, a large number of eye shadow will be used to highlight the look of the eyes. Usually, when making up in life, choose the color that you like and match with the color of Lipstick and clothing, touch a little eye shadow with your finger belly on the outer corner of the upper eyelid, and gently smear it from the outside to the inside. A simple wipe can make the whole person more colorful.
3. Eye shadow is a kind of color makeup, which is used to smear on the eye face (i.e. eyelid) and corner of the eye to produce shadow and tone contrast. Eye shadow is in powder, stick, paste, lotion, pencil and flake. The colors are very diverse, including blue, green, brown, tea, brown, and purple. Other colors are black, white, red, and yellow.
4. Eye shadow is a kind of cosmetics that can enhance the three-dimensional effect of the eye and modify the eye shape to set off the eye's radiance. It has rich colors and diverse varieties. Asian skin is yellow, and it is difficult to match eye shadow color. Therefore, we should follow the balance principle, balance the relationship between facial skin tone, hair color and eye color, and make us look radiant.
The Basic Situation, Main Problems, Future Development Direction and Key Points of China's Printing Industry
I. The basic situation and main problems of China's printing industry Since the reform and opening up, the leaders of the CPC Central Committee and the State Council attached great importance to the printing and technology equipment industry in China. To solve the difficulties of books and change the backwardness of China's printing industry, Yao Yilin and Hu Under the care of leaders such as Qiaomu, Zhang Jinfu, and Deng Liqun, at the time the State Economic Commission established a printing technology equipment coordination group headed by Comrade Fan Muhan, developed a printing technology equipment development plan, and proposed the guidance of China's printing technology. "Laser photography, electronic color separation, offset printing, binding linkage" 16-character principle. In 1983 under the support of the State Development Planning Commission and the Economic Commission, the special technical transformation of printing was included in the three-year national plan after the "6th Five-Year Plan", and "7th Five-Year Plan" and "Eighth Five-Year Plan" were retained until the "Ninth Five-Year Plan" period. (After the National Economic Commission withdrew, it will be replaced by the State Council's major office). Taking the books, magazines, newspapers, packaging and decorating printing factories as the leader, the printing equipment and equipment manufacturing enterprises in machinery, electronics, light industry, chemical industry and other areas are organized in one-by-one fashion according to the systematic project. In the past 18 years, the total investment has been nearly 3 billion yuan, and more than 200 enterprises, research institutes and colleges and universities have carried out continuous technical reforms, which has effectively promoted the development of China's printing and equipment equipment industry and technological progress. Mainly in the following aspects: The printing industry has begun to take shape Computer laser Chinese character photo editing system has reached the international advanced level Book printing has new changes Newspaper technology and equipment have made great progress Packaging printing level has greatly improved Printing machine manufacturing The industry has made great progress... While recognizing the achievements of our work, we must see that there is still a big gap between China's overall level of printing technology and equipment and developed countries. The main problem is the contradiction between the market's demand for high-end fine color printing products and insufficient production capacity. The specific performances are as follows: 1. Prepress processing equipment 2. Printing machinery production 3. Postpress processing equipment 4. Printing equipment 5 Electronic Publications Second, the development trend of foreign printing industry The color desktop publishing system has been widely used in the field of direct plate-making and digital printing has become the mainstream of development. Printing machinery to the development of high-precision, high-efficiency, multi-color and optoelectronic integration foreign flexible Development and Trends of Printing Technology: According to relevant information, flexographic printing has developed rapidly in the United States and Western Europe in the past 10 years. The general trend is that the proportion of offset printing and gravure printing is gradually decreasing in several printing methods. The proportion of flexographic printing is gradually increasing. This change is particularly noticeable in packaging printing. This is mainly determined by the advantages of flexographic printing itself. To sum up, there are mainly: 1 The structure of the equipment is relatively simple, so the cost is low and the equipment investment is low. 2 wide range of applications. 3 wide range of printing materials. 4 high economic efficiency. 5 Shorter plate making cycle, less loading time, faster printing speed, shortening the entire production cycle of printed materials. 6 According to the different requirements of products, water-based inks that do not pollute the environment can be used, and besides being suitable for non-toxic and non-polluting green packaging, it is also conducive to environmental protection. The post-press auxiliary equipment has developed rapidly in the direction of multi-functional and automation electronic publications. Third, China's "Ninth Five-Year Plan" from three years to 2010, the development direction of the printing industry ... In 1997 and April 1998, printed and printed by China. The Equipment and Equipment Industry Association organized the relevant personnel of the national printing industry after many arguments and put forward the "prepress digital, networking; printing multi-color, high efficiency; diversified after printing, automation; equipment high quality, serialization" 28 characters printing Technological development policy. The following four aspects are recommended: (1) Prepress digital, networked (2) multi-color printing, high efficiency (3) diversified after printing, automation (4) high quality of equipment, serialization IV, future development focus of the printing industry Recommendations are the following four aspects: 1. Books and periodicals 2. Newspapers must adapt to the needs of expanding and coloring newspapers. Central and provincial newspapers must fully promote the color desktop system, and a small number of newspapers should implement computerization of printing, printing, and printing. 3. Packaging and printing should meet the needs of the two markets, and vigorously develop high-tech packaging and printing, exquisite color packaging and printing, green packaging and printing and aseptic food packaging and printing. 4. Special Printing 5. Suggestions for the implementation of the 28-character technical development guideline for the printing industry 1. It is recommended that the relevant government agencies such as the State Economic and Trade Commission, during the “Tenth Five-Year Planâ€, still include the key development projects of the printing industry as “printing special items. "And give support in terms of policies and funding. 2. In order to ensure the implementation of the 28-word technology development policy for the printing industry two years after the "Ninth Five-Year Plan" and 2010, the state must give preferential interest subsidies and tax exemptions, and at the same time it must focus on supporting high-tech advances related to printing special projects. Research and development and industrialization, such as research institutes, institutions of higher learning, and other institutions that develop products such as thermal plate, on-machine platemaking systems, and digital printing technology of internal cylinders, are proposed to be given by the State Economic and Trade Commission. The financial appropriations will be used to promote high-tech production as soon as possible and increase the bargaining power in the process of introducing new and high technologies. 3. For technological transformation projects that are mainly introduced, if the current newspaper printing is in urgent need of a direct platemaking system, the State Economic and Trade Commission shall implement multiple users on the basis of full investigation and research, focus on external negotiations, and integrate technology and trade to promote high technology. Transfer to gradually realize localization. 4. At the same time as the country implements tax exemption for high-tech products, it also deals with equipment included in the national special product structure adjustment (such as high-speed multi-color sheetfed offset press, 60,000 printing/hour, high-speed rotary offset press, high-speed flexographic printing Machines, etc.) The key components required for production should also be subject to the same tax exemption policy in order to increase the market competitiveness of similar domestic equipment. ......