Tubular Picket Ornamental Fence A tubular picket fence is a type of fencing that is made up of vertical pickets or posts that are connected by horizontal rails. The pickets are typically made from tubular steel or aluminum, which makes them durable and resistant to rust and corrosion. The fence is designed to provide a secure and attractive barrier around a property, while also allowing for visibility and airflow. Tubular Picket Fence,Tubular Picket Ornamental Fence Aluminum,Tubular Picket Ornamental Fence,Tubular Picket Fence Panel HEBEI DOUDOU METAL FENCE PRODUCTS CO.,LTD. , https://www.security-fencing.com
1. The choice of indentation line (brew line); 2. The choice of bottom line (bar); 3. Die cutter version of the use of sponge rubber; 4. Indentation knife (beer knife) RBI. First, the choice of carton die-cutting indentation line (brew line): The choice of indentation line (brew line) in carton die-cutting is very important, but many people do not pay much attention to the choice of their specifications. Unsuitable indentation lines often lead to inconspicuous creases or crease bursts. The correct choice method:
a. The thickness of the indentation line (beer line) ≥ the thickness after the flattening of the corrugated board: d≥e.
b. At present, the indentation line (beer line) is still used in foreign countries and is usually referred to as “pointâ€. Each point (P)=0.014in (≈0.36mm).
The height of the indentation line (beer line) = indentation knife (beer knife) height - the thickness of the corrugated board after flat pressing.
Second, carton die cutting in the bottom mold bar (line) choice;
The correct selection method for the bottom mold strip (line) in the carton die cutting: Formula B=(e×2)+d.
Calculation method: First, after measuring the corrugated paper thickness e after flattening, the thickness A of the bottom mold strip (line) can be calculated. For example: a. After the flattened corrugated board thickness is 1mm; b. According to the formula B=(e×2)+d, the width B of the bottom die bar (line) is found, ie (1×2)+1=3 mm. According to the calculation, it is advisable to choose an appropriate size of 1×3.
In general, the selection of the bottom mold bar (line) can use the same or similar specifications according to the existing bottom mold supplier's specification table. There are different widths for the same thickness in each supplier, and there are also specifications for the same width and thickness. Therefore, manufacturers should pay attention when choosing. First understand the supplier's specification sheet, and then find the required specifications. In addition, in actual use, in order to achieve the best indentation effect, it is placed on the ruled bottom mold strip (line), and the width B is reduced by 0.1mm-0.2mm. For example, if a suitable specification is calculated to be 0.4×1.3 mm, for a ruled corrugated cardboard, 0.4×1.2 mm should be used.
Third, the carton die-cutting in the use of die-cutting knife sponge rubber.
1. The correct use of sponge glue: When the sponge glue is placed too close to the indentation knife (beer knife), the compressed sponge rubber will not have any space to expand and contract. Eventually it will cause the cardboard to tear outwards, resulting in non-smoothing of the printing plate and the edge of the paper.
a. Place the standard distance of sponge rubber.
b. In die-cut corrugated board, the optimal placement of sponge glue in the die cutter. Sponge is about 150mm long and is placed on both sides of a beer knife, each 5mm apart.
Fourth, the carton die-cutting, die-cutting knife version of the indentation knife (beer knife) dotting (NICK) points: Drilling is very important for the operator, dotting can not only pull the cardboard in the drag and delivery, but also Can meet the appearance of the use requirements. Therefore, pay attention to the setting of the connection point and try to avoid the glueing position. In general, the corrugated cardboard dotting: b = c (corrugated board thickness) + 0.2mm, a = 1-3mm. The above points are just some of the basic points in die-cutting corrugated boxes. Of course, in actual use, the operator also needs to be flexible in the light of the actual situation and use it better in practice.
Tubular picket fences come in a variety of styles and designs, including traditional, contemporary, and ornamental. They can be customized to fit any landscape or architectural style, and can be painted or powder-coated in a range of colors to match the surrounding environment.
One of the main advantages of a tubular picket fence is its strength and durability. Tubular picket fences are commonly used in residential, commercial, and industrial settings. They are often used to enclose swimming pools, gardens, and outdoor areas, and can also be used for security and privacy purposes.
Application of lithographic die-cutting indentation process in corrugated box
At present, in general, when customers do die cutting of cardboard (white paper), the first choice must be flat and flat die-cutting indentation process. It can be said that flat die cutting in the cardboard packaging industry has been more and more widely recognized. But relatively speaking, the use of flat die-cutting in the corrugated box industry has only been a few short years. In recent years, with the continuous improvement of people's needs, the requirements for product quality have become higher and higher, which has led many carton makers to change the heavy and lagging die-cutting process in the past, and to use high-quality flat-press die-cutting and die-cutting creasing machines in large quantities. However, because many manufacturers do not really grasp the points of use of the die-cutting process, and in particular do not understand the characteristics of the carton in the die-cutting process and the difference between the carton die-cutting and the white cardboard die-cutting, they have not been able to actually play flat in practical use. The characteristics of flattening and die-cutting are also difficult to solve when encountering many problems. Therefore, we believe that to make a perfect carton product, it is very important to really grasp the use of die-cutting technology. At the same time, the selection of die-cutting and indentation accessories is also very important. These very many manufacturers do not necessarily understand. Below, we focus on the following points in the die-cutting process: