Customized DVD CD Sleeve Packaging Box Specialized Case

1.EVA shell with fabric surface  

2.Any logo and color are avail

3.OEM service

4.Waterproof, shockproof, lightweight and breaking-proof

5.Water resistance: closed bubble structure, not water absorption, moisture proof, good water resistance.

6.Corrosion resistance: resistant to seawater, grease, acid, alkali and other chemicals corrosion, antibacterial, non-toxic, no pollution.

7.Processability: and easy to hot pressing, cutting, coating, bonding and other processing.

8.Anti vibration: high resilience and tensile strength, strong toughness, good shock proof / buffer performance.

9.Temperature preservation: thermal insulation, heat preservation and low temperature performance excellent, can withstand cold and exposure.

10.Sound insulation: closed bubble hole, sound insulation effect

11.Resilience: elongation and springback are better than other materials.

1. The fabric fits with EVA.
2. The material is fitted with EVA.
3. The composite material is usually made of sheet material, and the size of the material is generally 1.4 / 3.2 m.
4. According to the actual material width of our products, open (cut) into a corresponding size of small pieces.
5. The next is hot pressing (or cold pressing) molding, any product can, as long as the mold out, can be pressed out, the LOGO above the product can choose hot pressing, can also choose to move up. Or both hot transfer printing, can be monochrome, but also multi-color, according to the customer like.
6. The auxiliary materials can be used for sewing the car seat , and the inspection and packaging is carried out .
7. And then there's the QC test.

8. Packing and shipping:
Fit - - cut - die - die - - seams - Inspection - Packaging - Shipping

1. Competitive price

2. Good after-sale service

3. Fast delivery time

4. High quality control

5. Good choice for promotion, gift, jewelry etc

6. Box is made of 100% eco-friendly material

7. Customized size, design, printing is welcomed

8. Provide one-step service from design, produce to quality control, sale and shipping

1.Q:I'm more concerned about whether you are a factory or not? 
   A:Of course, we are factory. We have better quality control and better price.

2.Q:Whether the sample can be provided free? 
   A:Yes, we provide samples for free,except the new mould and customized logo. Customer only need to pay the cost of courier by Express. And the freight is refundable when order confirmed.

3. Q:What is the logistics mode of the goods?
    A:We always by air transport,land transport,sea freight is of course. 

4.Q:What the Test standards of product? 
    A:Of course,International ROHS Standard. 

5. Q:Can your factory accept OEM/ODM? 
    A:Yes,We Can accept OEM/ODM,and We have a professional R & D and production team.

6. Q: Why do I select Classic Packing as best choice?
    A: 1. With extremely strict raw material standards, we only use the best raw materials.

    2. We are original factory, which means all the intermediate channels costs are reduced and more competitive price offered.

    3. According to different requests, 6 quality inspections are completed.

    4. Customized solution for specific requirement will be supplied by our own oustanding sales team and skillful R&D team.

Nylon Zipper

Nylon Zipper(Coil Zipper, Polyester Zipper)

Nylon zipper is a zipper, nylon monofilament is wound around the center line formed by heating stamper.

According to the material zipper, zipper into three categories: Metal Zipper, resin zipper, nylon zipper. Metal zipper teeth is made of copper or aluminum row by row of teeth out of the machine, using polyester resin zipper teeth are plastic rice by color and by dye injection molding machine out of the row, and nylon zipper teeth are made of nylon monofilament by heat press winding mold centerline thereof. Qikai accessories Tips compared to metal zipper, resin zipper, nylon zipper low cost, high yield, high penetration characteristics.

Quality Introduction
Nylon zipper can be divided by species:
1, closed-end zipper
2, open-end zipper (about interpolation)
3, two closed-end zipper (X or O)
4, double open end zipper (about interpolation)

Features introduced
1. nylon zipper can be used in all kinds of occasions, but generally prefer to use on sportswear, shoes, bedding, luggage, tents.
2. Common slider is painting, sometimes using electroplating.
3. nylon zipper material is mainly polyester, the cost is relatively low, the market is currently more like a zipper.

Installation method
â‘  First prepare nylon zipper and zipper fabric needs to be filled

â‘¡ will need to install a zipper 1.5 cm wide seams first basting again, and then ironing the seam allowances apart. If you do not need to crack the whole are installed on the zipper, then do not install this period seam zipper parts used needle from going fine point, and the start and end positions have to use down the needle holder;
â‘¢ nylon zipper face down and centered seam allowance, using a hand sewing needle and parts of it basting fixed;
â‘£ fabric will turn positive, to sew on a sewing machine fitted with a zipper unilateral presser foot, down the right side of the presser foot needle, start from the opening to the right of nylon zipper, 0.7 cm seam allowance on the fabric in a press Ming line;
⑤ When you have finished one side of the suture, the seam preparation when the other side, look at the bottom zipper bag iron location, if you can avoid it, you can turn 90 degrees, so that the needle across the top of the zipper to the other side began to suture . Jiangsu Qikai turning accessories recommendations should let the needle in the lowest position and then raise the presser foot, and then turn down the presser foot to continue sewing. When sewn to the top of the zipper teeth are not going to step on the electric motor, but turn the machine round, so the needle carefully over the nylon zipper teeth, to avoid needle;
â‘¥ If the package iron just at the turning position, then you will only press down the left foot needle, from the opening began to sew a bright line on the left. Qikai accessories Tips Note Crimping beginning and end do not forget to pin down. Finally, the suture removed sparse cloth on;
⑦ car for law skilled people who can not be basting, but for the novice, making the process more steps are still necessary, although to a little trouble, but it ensures satisfactory results.

Components Introduction
1. tape tape made of cotton yarn, chemical fiber or mixed fiber woven into a flexible belt for carrying chain zipper teeth and other components;
2. ribbed edge bead cloth belt used to carry the reinforcing part of metal or plastic fastener elements;
3. tendons rope rope rope middle finger ribbed by a multi-strand fiber composition;
4. refers to the element scoops metals, plastics and other materials were processed through a shaped teeth;
5. SMIC line filler cord is processed by multi-strand fiber cable made of nylon fastener chain for the production of rope;
6. The tooth chain chain refers to the teeth are arranged in a row;
7. The fastener stringer one side zipper chain chain teeth fixed in a cloth belt, said fastener stringer;
8. The chain belt on both sides of the zipper chain from engaging fastener stringer chain belt;
9. TDC top stop fixed to the fastener chain belt fastener chain pull timely limiting slider stopper slide fastener chain belt;
10. The next stop is fixed to the bottom stop tooth chain belt, limiting the slider when the slide fastener stringer chain teeth pulled, and so both sides of the fastener stringer can not be completely separated from the stopper;
11. The front and rear portions of the element does not take the lead tape, said the lead on Back & forth head tape zipper, the only side to take the lead before the next stop after the end of the lead;
12. The cannula (also called latches) pin separable fixed in the open end of the end of the zipper, for completely separate tubular member chain belt;
13. The outlet box retainer secured to the end of the zipper open end, entirely separate block member for chain belt;
14. The double open end stops at one kind of the cannula with two pin for the tubular member profile zipper on double open end;
15. Strengthening tape strengthened tape for enhanced intubation, sockets and tape bonding strength, improve the life of the fastener composite sheet;
16. The slider slider moving part and pull the chain engaging teeth;
17. The puller is a component of the pull-tab slider, which can be designed into a variety of geometric shapes and the slider body coupling or through middleware and the slider body coupling realize zipper closure;
18. The intermediate coupling member coupling the connecter of the slider body and the pull tab of the intermediate member;

*Related Products:two way separating zipper.

Nylon Zippers,Nylon Coil Zippers,Nylon Coil Zipper,Nylon Coil Zip,Nylon Zip

Shenzhen Yiyixing Zipper Manufacture Co.,Ltd , https://www.nicekeychain.com