A. Choice of face material In the film material, the transparency of the PE without PP is good, and the PP label material is preferred in products with high transparency requirements. However, PP materials have problems in extrusion resistance because they have undergone biaxial stretching treatment. B. Reasonable matching aspect of glue The label generally corresponds to the coating method of three different glues, one is water glue (or latex), which is the most popular; the other is hot melt glue, suitable for rough surface or low temperature use; the third is solvent glue, suitable for various special purposes. Environment (such as environmental changes, labeling environment, etc.). C. Common bubble problems Over the years, the phenomenon of air bubbles caused by static electricity has been recognized and there are many solutions. In fact, the problem of labeling bubbles caused by static electricity is indeed one of the main factors. Of course, there is a case where a bubble problem is generated, which is easily overlooked, and it is difficult to improve when a bubble phenomenon occurs, that is, a label shape design problem. D. Covering the problem that the label encounters when selecting materials In recent years, more and more companies have encountered the need to use cover labels because of adjustments to the original contents of bottles or hoses. However, the choice of cover labels may not be the same for each company. Some hope to cover the following contents. Some hope to cover them after they are covered, and some hope to make consumers cover them when they cover them. See the original content below and more. E. Different requirements of workers when labeling There are several different concepts for stickiness when labeling: initial tack and final tack. The initial tack is the tacky performance at the beginning of the labeling, and the final tack is the tackiness after labeling and reaching a steady state. Not all labels become more and more viscous over time, some have strong initial tack, but the final stickiness is weak, and some are weak at initial tackiness (we are weaker than conventional ones), but eventually the stickiness is strong, and the final stickiness will be with time. Gradually enhance to achieve the best in its scope! F. Problems with temperature The temperature of the label has two concepts, one is the labeling temperature, the other is the use temperature, the labeling temperature is the labeling ambient temperature, it takes a certain time to achieve the fusion of the label and the object to be attached, and the use temperature is in the label and the The temperature range that can be applied after the fusion of the stickers! Bigger size: Our glass false lash holder comes with bigger size, big and heavy enough to avoid falling down, it won't move during the procedure and more convenient for you to pick up a false eyelash
Widely applicable: this adhesive glue holder is very practical for your eyelash extensions, widely applied for beauty salon, cosmetics studio, makeup artist, cosmetology school or individual home use, also a good gift for those who like to make up
Quality material: our pink false eyelashes glue holders are made of quality plastic, t Lash Palette,Eyelash Palette,Eyelash Extension Palette,Lash Palette Holder,Lash Glue Pallet,Lash Extension Glue Pallet Shenzhen Nanfang Shishang Cosmetic Utensil Co., Ltd. , https://www.nfbrush.com
The use of self-adhesive labels mainly lies in two aspects, one is functional, such as the reasonable choice of face materials, the correct matching of glue; the second is decorative, such as the exquisite printing pattern or special printing effect. Here, the first aspect is to properly organize the functional aspects of the application! It should be noted that there are many different reasons for each type of problem, just to extract some of them! 
Scale lines: each crystal false eyelash stand pallet is carved with scale lines into crystal from 8 mm to 20 mm, which is clear and accurate, more convenient for distinguishing the length of fake eyelash, allowing it easier and quicker for the eyelashes extension procedures
Smooth and weighted: the false lash tray strip is made of quality crystal glass material, weighted, reusable and washable, no corrosion, and durable to use, will serve you for a long time; Note: the glass is fragile, please handle it carefully
Adhesive glue holder: the radius is about 25 mm of our glue holder, arc design can keep your adhesive glue last longer and more convenient for your Eyelash Extensions, saving your time and energy during the procedures, you can put the sticker pad to the groove area, easy to clean and more convenient to work with
Disposable plastic glue pad: we provide you with Eyelash Glue pallets in total, sufficient amount for your daily application and replacement, you do not need to clean these lash extension glue pallets for reuse, they are disposable, convenient and clean
Versatile usage: this false eyelashes lash glue holders set can be applied in beauty salon, cosmetics studio, makeup artist, personal beauty care and individual eyelash extensions service, practical and useful for most eyelash extension occasions