In gravure printing production, because the solvent in the ink tank volatilizes, the uniformity of the ink is reduced, and the surface is easy to form into the ink and the ink block. After the plate roll is attached, the blade is not easy to be scraped, so that the printed product is produced by paste, knife line, etc. defect. This can be avoided by stirring the ink stick to "flow" the ink, mixing it continuously, and mixing it. The stirrer rod is generally a hollow rod made of aluminum alloy, and has a spiral continuous protrusion on the surface, so-called "corrugated" or unfolded line, magnetic material at both ends, which can be adsorbed on the plate roll, and the ink stick is printed during printing. Floating on the surface of the ink, when the plate roller rotates, it is rotated in the opposite direction by the adsorption. When rotating, the corrugation drives the surface of the ink to make the surface ink move, so that the ink is evenly distributed to avoid the corresponding quality problems of the printed product. Article source address: http:// Singlefold Paper Towel,V Fold Paper Towel,Hand Towel Paper,Paper Towel Single Fold BODA ENTERPRISE LIMITED , https://www.bodapaper.com