Tiles are an indispensable building material for decoration, and the presence of tile adhesives is certainly necessary when laying tiles. Is the tile adhesive a high-quality environmentally friendly polymer cement-based composite war material? It is a green and environmentally friendly product. Then the tile adhesive that how to use it? Tile adhesive when in use, what precautions do? The following Xiaobian together to understand it. 1. How to use tile adhesive 1. Clean up the dust, oil dirt, mud stones and other loose materials in the construction site. This process must be careful, because if these substances remain will affect the bonding effect of the tile adhesive. If the stability of the base layer is not good and the tensile strength is not enough, the base layer should be reinforced and the surface of the base layer should be strong and smooth. 2. After the base layer is processed, apply a layer of mortar anti-crack agent to the surface The purpose of applying mortar anti-crack agent is to improve the crack resistance and water resistance of the base layer. If the construction site is the wall of the bathroom, because the water absorption rate of the wall is very large, it must be coated with mortar anti-crack agent for the back cover treatment, otherwise the tiles will be easily affected by moisture after a period of time. 3. The tile adhesive cannot be used directly Instead, a certain amount of water needs to be added, and it can be used in the construction after stirring evenly. Just add fresh water, any other substances are not allowed to add. 4. The base layer is handled well, and the tile adhesive can be constructed after stirring. When everything is ready, you can put the tiles in order. After the installation is completed, the tile adhesive must be completely dried before it can be put into use. 2. Matters needing attention in ceramic tile adhesive 1. The best construction temperature of the tile adhesive is 5 ℃ to 35 ℃. At the same time, it is important to avoid too heavy moisture and to maintain the ventilation and permeability of the construction site. 2. The method of blending and stirring the tile adhesive is to add a certain amount of water to the mixing tank first, and then increase the binder by the amount, and the ratio of water to tile adhesive is 1: 4. When stirring, an electric stirrer is used at a low speed (300r / min) until the binder is uniform. 3. The binder after stirring is stirred once every half an hour and should be used up within 4 hours. 4. When using ceramic tile adhesive, use a toothed spatula to scrape a small amount of adhesive on the back of the ceramic tile, and then stick it to the surface of the base layer. Press firmly a few times to ensure the bonding strength. Make sure that each tile is pasted in the correct position, and do not move it within 15 minutes after it is pasted. Edit Summary: The above is the introduction of small series of considerations on how to use tile adhesive tile adhesive and the use of it, after we finish reading this article, for tile adhesives have been more comprehensive understanding of it, certainly To master the correct method of use. What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
We providing products, the variety and diverse, quality assurance, and provide after-sales service guarantee. The top shower with double pressure boost from thickness and air-pushing offer consistent powerful rainfall shower experience even under low water pressure. Easy installation in wall-mounted or ceiling-mounted shower arms without any tools in few minutes.
Top Shower Head,Rainfall Shower Head,Overhead Shower Head,Ceiling Mounted Shower Head Kaiping Yufa Sanitary Ware Co.,ltd , https://www.dlsen-faucet.com
