[ Chinese wardrobe net ] Every year, there is a "back to the south" in the south. The air is relatively humid. If the indoor wardrobe does not have a backboard, the clothes and bedding contained in the closet are easily damp and mildew, causing the clothes to smell and even damage the clothes. The backboard is mainly dust-proof and moisture-proof, and has a stable effect. The thickness of the overall wardrobe backboard is commonly used in three thicknesses: 5MM, 9MM, and 18MM. The following website analyzes the overall wardrobe from three aspects: backlash, moisture, and stability. The thickness of the backing plate is better. Under normal circumstances, the whole wardrobe is installed in the living room, which is standing against the wall. The largest contact area between the wardrobe and the wall is the back panel of the whole wardrobe. The whole wardrobe is made up of different panels, and the back panel is a single board directly nailed to the two side panels. 1, 5MM thickness Gap: Use a 5mm overall wardrobe back panel to leave a lot of space, which is why many consumers or businesses choose 5mm backplane. However, the thickness of the 5mm backing plate is always too thin. Whether it is the slotting of the back panel of the wardrobe or the stability of the overall product, the 5mm backboard cannot fully exert the performance of the wardrobe. Moisture-proof: The 5mm-thick wardrobe backboard can basically meet the moisture-proof performance. Although the moisture will not be directly immersed, if it encounters a serious rainy season, it will cause certain damage to the moisture resistance of the board. Many consumers will choose a 9mm wardrobe back panel. Stable: 5mm wardrobe back panel stability, if it is a large wardrobe, the length is between 1000mm-2000mm, for the stability, the backboard is less stressed and less likely to be deformed. If the length of the wardrobe is greater than 2000mm, the corresponding force of the backboard is too large, and the 5mm backboard is more easily deformed, and the backing is more likely to break. 2, 9MM thickness Gap: 9mm back plate is the common thickness size of custom closet, because in the gap processing, the thickness of 9mm back plate is more suitable for slotting, and the gap with the wall plays a very good role, and the wardrobe space occupied by the backboard It will not be very large, which will help to leave a gap between the backboard and the wall to make the moisture resistance better. Moisture-proof: 9mm thick overall wardrobe back panel, can make moisture-proof work in the space of the saved space, make the backboard more secure, and also properly reserve the gap, and the appropriate moisture-proof cotton can be added in the middle. The wardrobe back panel is more resistant to moisture. Stable: The bearing capacity of the 9mm-thick wardrobe backboard is sufficient to support the gravity of the top cabinet and each laminate. Not only can the wardrobe be stabilized, but also more space can be reserved, so that the wardrobe will not protrude and will not cause the wardrobe. The use area is smaller, and the like, and it is more suitable for the overall wardrobe with a larger width, and the effect is further exerted, so that the entire wardrobe becomes extremely strong. 3, 18MM thickness Gap: 18mm overall wardrobe back panel thickness is more limited than the effect of 5mm and 9mm thickness. Because the 18mm wardrobe backplane takes up a lot of space, it will cause the original space to occupy or stand out. If other moisture-proof methods are used, such as adding moisture-proof cotton on the backboard and brushing the moisture-proof paint on the wall, although the space occupation will be reduced a little, it will cause the overall layout volume of the wardrobe, and the depth of the wardrobe will be reduced. Moisture-proof: In terms of moisture resistance, the 18mm wardrobe back panel is not superior to other thicknesses due to its increased thickness. Because moisture is slowly invaded by moisture, not directly in the water. Stable: The 18mm-thick wardrobe back panel is the strongest in weight and stability. Even if the weight is added to the top, the wardrobe back panel will not be deformed, and the connection between the hardware components is relatively stable, which makes the overall wardrobe look even more Stable and thick, it makes people feel more secure. Through the above analysis and comparison, the overall wardrobe back panel of 9mm thickness can achieve perfect effect in terms of moisture resistance and stability.
This category is for Bronzer Brushes. There are some different types of Bronzer Brush with different shapes of Makeup Brush head. The Large Fan Brush features fluffy brush head perfect for soft application of powder products and for a light dust of shimmer onto the skin. The Domed Bronzer Brush has a rounded and dense brush head which is perfect to provide a smooth, one-sweep application of bronzer and to create a natural-looking, sun-kissed glow.
Bronzer Makeup Brush,Bronzer Brush,Domed Bronzer Brush,Must-Have Bronzer Brush SHENZHEN MERRYNICE COSMETICS CO., LTD , https://www.merrynice.com