[ Chinese wardrobe network ] A project of woodworking and home improvement project has occupied an important position in the previous house decoration. With the development of the economy, the status of woodworking in home decoration has gradually weakened. Today's doors and windows are no longer a single wooden material, there are aluminum alloy doors and windows, stainless steel doors and windows. Even the ceiling now has more material than before. However, woodwork still exists, such as wooden furniture, wooden keel ceilings, wooden doors and windows. If you are decorating a woodworking project, follow the small series to see the relevant precautions for woodworking acceptance. Part1: Wood solidity stability, check carefully to ensure safety The most prone problem in woodworking construction is the stability problem, which is also the most deadly problem. The connection between the door sleeve and the wall is not stable, and the cabinet is not installed firmly. These conditions will affect the use of the house. Frequently Asked Questions: There are too few fixed points for the door cover and the wall In order to save the cost of decoration, many all-inclusive decoration often cuts the materials on the materials. Most of the common problems on the door cover are that the door sleeve and the wall have too few fixed points. A two-meter-high door cover is fixed by three small wooden blocks, and its solid stability can be imagined. Supervision opinion: multi-point support, glue filling The fixing of the door frame and the door cover should be multi-point support. After leveling and vertical, apply glue to fill it to strengthen the firmness. Other wood making, such as window coverings, should also be made with reference to this standard. Part2: In order to prevent home from having color difference materials, choose university question During the renovation, many people like to let their own styles of woodwork, but the effect is not the same, not only the texture, color, etc., this is a headache. When decorating woodwork, you must look at the materials and choose the right color to avoid differences in effects. Frequently Asked Questions: There is an error between the design and the actual object. Many times we will encounter this problem, obviously the design is the same, but the actual thing after the completion is another. On the designer's design drawings, the furniture we saw was not the color, and the color difference of the surface of the furniture is now more obvious. These are the tricks of the decoration company, made of cheap materials, and the deviation from the real thing is also based on "finished work". Supervision opinion: Select materials during construction to pay attention to According to the regulations, there should be no obvious color difference on the surface of the furniture, and it is consistent with the color and style of the design drawings. When making furniture, use wood veneer to decorate. We must choose the style that is closest to the design drawing, and pay attention to the material with obvious color during construction to avoid affecting the effect. Part3: Checking the quality of workmanship is the last word. The style is good, the appearance is gorgeous, if the workmanship is not enough, the effect of the finished product is also unsatisfactory. Therefore, the key to inspecting the production of woodworking is to be optimistic about the workmanship. The meticulous craftsmanship, edge and surface treatment are not to be underestimated. Frequently Asked Questions: Woodworking cabinets are not tight enough Many times we are deceived by the appearance of the finished product after completion. The appearance is pretty good, but it is not carefully checked at the time of acceptance. It is only found when it is closed. It is not closed at all, and then it is still closed. Leave such a big gap. Supervision opinion: woodwork construction must be carefully supervised Woodworking seems to be simple, but in fact, the workmanship is also very particular. If the woodworker is sloppy, it will definitely affect the future use. Therefore, for shoe cabinets and lockers, the door panels should be able to be opened flexibly, cut neatly, and the seams must be carefully checked. Part4: Wood products are flat and smooth, and the appearance is more comfortable. The fluency of the appearance of wood products is an important indicator affecting the overall senses. The horizontal and vertical, curved surface must be done well, these details are the key factors to make wood products more beautiful. Frequently Asked Questions: Cabinet installation is not flat enough The last point of the small series to remind everyone is that in the installation of the cabinet must pay attention to the flat installation of the cabinet. In the production of lockers, the horizontal and vertical materials should be spliced ​​quite tightly, and horizontal and vertical, not only for aesthetic reasons, but also to ensure the stability and durability of the cabinet. Supervision opinion: straight lines of wood products According to the regulations, the wood products should be straight and straight, and the corners should be straight and not exposed. The installation position is correct, the cutting angle is neat, the seam is tight, and the wall surface is tight Beach Umbrella,Best Beach Umbrella,Beach Outdoor Umbrellas,Beach Parasol Shaoxing Shangyu Sansan Umbrella Co., Ltd , https://www.sansan33.com