Most consumers may not have heard of the ingredients of mahogany furniture, and this is an important process related to the aesthetics of the furniture, together with a detailed understanding of this traditional furniture process. The compounding process of mahogany furniture is a process of matching materials. This method is related to the selection of materials, and is also related to the line drawing technology, and is also associated with the knowledge of wood (see "Yu Yuzhang" in "Traditional Ancient Furniture Making Technology" for material selection, line drawing and wood knowledge). Because the ingredients are related to the rational use of materials, the problem of the service life and aesthetics of the furniture molding process is standardized. In particular, the frame material of the mahogany furniture is matched with the requirement that the timber structure is well stressed and the wood material is not wasted, and the material size of each part is gradually standardized, which is suitable for the furniture wood structure. For example, the wide side of the Yuan Dynasty leg material is often facing forward; in the Song Dynasty, the square legs of the square form are mostly used, but the structure of the æ¦«å¯ structure and the use of the squeegee are still not perfect until the line shape of the Ming Dynasty furniture. After the structure is perfect, it develops in the direction of the beauty of structure and plastic art, but the furniture legs are reappeared with coarse expansion and wide side facing forward. The reasonable art design method of the garden leg is well used, perfecting the shape and structure. Formation. In the Qing Dynasty, the materials were blended into lines and patterned carving cultures from various scales of curved material, round material and frame material. Mahogany furniture is the treasure of furniture art, the ingredients of furniture. Should grasp the following aspects: 1, the mix of frame legs This refers to the combination of frame material and leg material, and also refers to the main bone of the design frame in the process of making furniture. Only the transformation of the frame material shape and the determination of the amount of material can lay the premise and foundation of furniture production. The wide and narrow side is good for the front, according to the line type and art design choice. However, the width of the ingredients should be kept as uniform as possible, which is convenient for uniform unloading, but it is only necessary to reverse the width and the surface of the texture according to the force of the structure when drawing the line. 2, the combination of good and bad wood It is based on wood and chooses the combination of good wood. Good grain and knotty wood as a frame material. The root and sapwood and the patterned non-deformable sheet are used in the front, and the inferior and usable wood is used on the back or the bottom, but the disability must be overcome and removed. 3, the panel seam matching Panel seams are an important part of the selection of ingredients. The panel includes a table top; a stool panel; a drawer panel; a box panel; a panel mounting and a side panel, and a rear panel mounting. The seam matching is a glue joint between the wood boards, which has a good effect to achieve the quality of the production. This is also a prerequisite for the selection of materials. (1) The diameter of the cutting board is straight. The smooth cut board texture is smooth, remove wood defects, wood grain shape and material color, to be well grasped. (2), the string cutting board face is reversed. The wood cutting of the string cutting board is beautiful, but the wood shrinkage in the direction of the annual ring will cause unevenness, so it is better to reverse the direction of the end surface of the wooden board. (3), the box board seams are staggered. Because of the structural form of the wooden box and the wooden box and the dovetail, the wooden joints of the front panel and the side panel cannot be formed on one line, which is likely to cause cracking of the box seam, so the seam path should be staggered. (4), the drawer panel configuration pattern is opposite. The wood grain of the drawer panel has a symmetrical and beautiful decorative effect, and it is necessary to grasp the material variation and artistic beauty. (5), the carved wooden board is straight. Curved wood grain, generally does not spell the heartwood to the seam of the heartwood, mostly sapwood to sapwood. Only the wood grain is straight or slightly curved, and the heartwood is in the condition of the heartwood. As far as possible, the same kind of wood will be stitched together, the boards with the same hardness and hardness will be stitched together, and the boards with similar colors will be stitched together. (6), the matching of the defective wood. Frames that do not affect the force are available for the side and back. For plates with curvature, the joints should be bent when they are seamed. In this way, the deformation is small after the flattening. The frame material with curvature should be used symmetrically. Once the sheath is combined, it can be straightened. Wood with too much curvature can be sawed into short materials. Warp the wood, the seams should be matched to ensure the thickness of the board is sufficient. Otherwise do not use. For the knotted wooden planks, it is necessary to put the knots and defects on the side. This disperses the defects and does not concentrate on the middle portion. 4, a reasonable mix of small materials Redwood is a rare wood. The rational use of small materials and short materials is an important part of the processing technology. The art materials and structural design are used to perfect the short materials, which can also ensure the reasonable structure of mahogany furniture. AUTRENDS INTERNATIONAL LIMITED , https://www.petspetskitty.com