Pvc Child Rainwear,Kids Pvc Raincoat,Cheap Plastic Raincoats,Plastic Raincoat Disposable Jinzhou City Hejin Clothing CO.,Ltd , https://www.hejin-cloth.com
The most comprehensive explanation: half-water drift method!
1. First, slowly cut the lead skin until the tip of the water floats to the surface of the water or it is horizontal. Then, hook one bait on any of the double hooks and throw it out to the fishing area. At this point you will find that the float sinks, then trims the lead and hangs it again. Repeatedly, trim the lead until the float floats under half the weight of a bait, and the tip of the float appears horizontal.
However, it should be noted that the size of the bait used to adjust the float is not the same as the size of the habitual use. The size of the bait should be estimated at the bottom of the pool. Since the bait will sink from the surface of the water to the bottom of the pool, it will surely melt away part of it. A normal bait is The surface of the water will melt to about 2/3. Therefore, the bait to be used during adjustment and floatation should be taken out of a small group to make it less likely to be atomized, and it should be hooked with half of the 2/3 volume of the normal fishing bait. This is an important link and must be just right. Fate, the size of the bait can not be large or small, because the size of the bait determines the float's attention. If the float float force is chosen to be too small or the length of the drift tip is long, the float tip can be exposed from the trimmed lead skin by 1 or 1 head and half; if the drift body and buoyancy are large, the tip of the float is short (such as the hollow tail). , You can adjust the float tip to reveal half eyes or flat water.
2. After the float is finished, the empty hook without bait is thrown to the fishing area. It can be seen that the float sinks to a certain position and no longer sinks. The number of meshes exposed is the one you use today.
This number is the most suitable one for today's combination of bait weight and hook weight. There may be floating buoyancy in 3 orders, floating buoyancy in 5 orders, and the same floater. The fishing group may be due to the heavy bait in the 3rd head yesterday, and the bait light in the 5th head today, but this is not important. The important thing is that this head number is what I call the center heading. With this center, floats Only spirit and bluntness. Then, when we are fishing, we will push the fishing target up and down to adjust the state of the control bait at the bottom of the pool, so that we can make all kinds of dull and sensitive fishing required by us.
3. In this method, the float is adjusted, and after the completion, the double-hook bait is thrown, the float will sink slowly, and then the float will be moved upwards until the double bait reveals 2 orders for fishing. I think that this method is more scientific, because the suspended float fishing function is mainly to control the state of the bait in the bottom of the pool. The lure stays in the bottom of the water as a standard. This adjustment method absolutely guarantees the bait. The weight of the two bait will not be dull due to the lack of buoyancy of the float and the majority of the supporting load on the bottom of the pool, and it will not cause the buoyancy of the float due to the blind adjustment. When it is too big, bait does not appear in the end and the bottom cannot be found. The purpose of this method of adjustment is to control half of the weight of the bait by the buoyancy of the float upward and the other half by the bottom of the pool to support the burden. This method will surely ensure that the long hooks are stable and lying on the bottom of the pool, and the short hooks can also stably reach the bottom.
Standards for floating and catching should be centered around the bottom of the bottom of the pool where the floats control the lure, and then another theory such as a bait float, double hook subsea or semi-water float fishing can be used to separate the bait from the center.
Regardless of the state of the bait in the bottom of the pool and the effect of the bottom of the pool on the supporting ability of the baits, no matter what the circumstances are, the number of floats is adjusted to a very low level. Because the buoyancy of the float is not enough, the weight of the bait is mostly borne by the pool bottom. The phenomenon of dullness will cause the double bait to be trapped in the mud, and even the buoyancy of the float will not be enough to make the line group unable to straighten, causing relaxation, affecting the process of transferring the fish signal to the float in the first time, and more serious will be transmitted. The signal was consumed during the process and no signal was given. If blindly adjusting the float's tone to too high a level, it will cause difficulties in finding the bottom, or it will not be able to find the bottom dull phenomenon at all.