Multi Tools Head,Multi Tool Attachment Heads,Dewalt Multi Tool Sanding Head,Multi Tool Sanding Head Shaoxing Haotuo Machinery CO., LTD. , https://www.haotuochinatools.com
The merits and demerits of bait and float and detailed steps
Many adjustments and drifts, the fish sister that the most convenient and the most rapid adjustment method is to adjust the float with bait, with bait adjustment drift also has some advantages and disadvantages?
advantage
The timely state of the bait in the water can be grasped in a timely manner: the size of the bait group, the dissolving speed, and the bottom is float. It also reflects the exact location of the fish. For example, the bait gradually dissolves, and during the slight rise of the float, sudden bursts or accelerated rises occur.
The second is the sudden stoppage or acceleration of the bait in the process of falling, which is often referred to as "cut-off." If these two phenomena occur frequently, many indicate that the fish have left the bottom.
The third is to change the fishing method in time without increasing or decreasing the lead. Fishing rod: increase the bait group; fishing rod: reduce the bait group; fishing float: change it to pull. Change freely and vary from time to time.
Shortcomings
Technical requirements are relatively high. The water quality of the fishing area, the size of the bait, the solubility of the bait, the length and length of the brain line, and the characteristics of the float have all affected it.
Among them, the characteristics of floats are particularly important. If you do not understand the drift you use, do not understand the buoyancy, texture, sensitivity, absorbency, and scope of application, you should not use this method. And these need a long time of practical exploration and summary. For beginners, the difficulty can be imagined. It has often been fishing for a long time, but also on the fish, but still can not find the best opportunity to fish. I can't even see the fish, disturbing the fish's mouth.
Kill the needle, and then talk about it with a few words: with bait adjustment float generally linked to double bait and hanging bait two kinds of tune.
Double bait
(1) This method is mostly used for floating fishing. It is blunt in floating fishing but is the most sensitive for bottom fishing. However, this method has a certain difficulty in finding the bottom; even if it is found, it will not be able to ensure that the bait can touch bottom at the end because of technical movements and underwater inequalities. In addition, the double-bait adjustment is not necessary. In fact, as long as the double bait is not in the end, it is theoretically very sensitive. When there is a fish swimming, the float will react and it is easy to grasp the fish situation in time to prepare for the fish. But at the same time there is also a false mouth phenomenon, the larger the fish, the more obvious the false mouth. Whether you swallow or not, it is difficult to judge.
(2) As the name suggests, the total weight of the double-hook bait rear fishing group is equal to or less than the float's buoyancy, so that the double-hook bait suspension is suspended in the water. On this basis, the lead skin is adjusted to level the water or the tail floats to expose the surface of the water. (usually no more than 2 mesh) - called "hanging double bait float". After adjusting the float in this way, the bait can be easily placed in each water layer. It is not difficult to see: Its advantage lies in fishing floats. Such as the fishing from the end of the floating pipa, pipa, as well as in the upper waters of grass, grasshoppers, oysters and so on. Some people nowadays use it for bottom fishing (mostly double bait leveling water): a bait lightly touches the bottom and a bait is off the bottom.
(3) How to find the bottom? When the double bait is hung on the hook, the float can be adjusted to the bottom of the float to reveal the surface of 2-3 heads (must be larger than the half-water when the head is adjusted), and it can be ensured that the bottom bait has bottomed out. Then move the float down a little bit, it is best to adjust the fishing target into a sight, for example: 2 eyes to catch 2 mesh. At this point, the bait lightly touches the bottom and the bait hangs off—this is what fishers often say. If the double bait is tuned into flat water, looking for the bottom as long as you can see drifting, it means that the bait has been affirmed in the end. When the bait is moved, the fish is swallowed and the fish can be lifted. This is also the more sensitive one in the floating bottom fishing method. Especially suitable for fast fish.
(4) However, when there is a fish approaching and not sucking the bait, the turbulence of the fins will cause a change in the water flow, which will inevitably affect the balance of the line group, and thus produce false fish information, causing the fisherman to misjudge. Therefore, it is particularly important to distinguish between true and false fish information. This is also the bottleneck of this type of adjustment. In the same way, due to factors such as uneven bottom or unbalanced bait size, the fishing line will change from top to bottom. This is a normal phenomenon. Should be flexible and must not be applied. Moreover, it is not sensible to use this method if wind and waves have a significant impact.
Single bait
It is divided into two categories: hook, taste, float, hang hook, and diet.
(1) Whether it is on the hook or on the bait, the half-water will be floated into flat water or floated to reveal a certain number of meshes (usually no more than 2 meshes). After the single bait fishing group is balanced, if a bait is added, the entire fishing group will sink until the bottom bait touches the bottom and the bait lightly rubs the bottom or hangs off (the bait state and the sub-strand are thin and soft. Hardness related).
(2) Single bait adjustment and drift: There is no problem to find the bottom, as long as the number of exposed tails is greater than or equal to the heading. This method of adjustment is easier to master than the double-bait method. Fish information is more real and the applicable fish species are more extensive. The advantage of adopting this method of adjustment compared to the use of an empty hook (that is, the traditional Taiwan fishing method, commonly known as the "4 fishing method") is that it has added a tunable variable (bait weight) to it, so it has higher sensitivity. Fishing is more accurate.
In addition, the long-term practice found that the matching of fishing groups is also a decisive factor. The models of the big line (bus bar) and the brain line (sub-line) are best close to or the same. With this arrangement, the number of clear and accurate messages (especially float fishing) is very high. Hooks, preferably with small medium size (large or small, are not easy to use).
With bait drift, although there are many advantages, but its limitations are also obvious: suitable for competitive fishing! It is self-evident that for the leisure fishing, especially the vast majority of the fish, the difficulty is self-evident! Of course, it is a good thing to master more techniques and methods and improve your own level.