Solid waxes are commonly used to protect topcoats and are sometimes used to finish barewood furniture. This method is best suited for fully polished smooth, hardwood, such as maple. Some waxes add color and are used exclusively for darker woods such as walnut. These waxes can color the wood. If the paint applied to the wood is uneven in color, it can be covered with colored wax. However, the wax does not color the wood or restore the topcoat. The solid wax is simple to apply, non-tacky, and heat resistant, but is easily broken and is also prone to wear. It must be repeated repeatedly. Solid waxes are used more in the coloring, sealing, and application of new or strip wood. Primer colorants, including the commercial range, are available in several colors. The color of the primer colorant is uniform and does not cause overlapping marks or dark spots. They are not only durable but also easy to apply. They are not very resistant to water and must be reapplied periodically. But before you apply it, it's important to know the type of wood you are applying. special requirements The solid wax can be applied directly to the prepared bare wood or to the colored wood; it is recommended to use the diluted shellac as the primer layer. The primer colorant should be applied directly to the prepared bare wood; no additional primer is required. The sparse wood should be coated with a filler before waxing. The filler can be any compatible paste filler. Both wax and primer colorants can be used for new or cut into strips of wood. How to apply solid wax The wood to be waxed should be thoroughly polished before being waxed and coated with a layer of diluted shellac as a primer. When the primer is completely dry, you can use 0000# steel wool to polish along the wood grain; then clean the furniture thoroughly with a damp cloth. You can apply a thin layer of solid wax to the wood with a clean, lint-free cloth pad. When waxing, apply a thin, uniform layer of wax in a circular motion. Wax only in a small area at a time. Some manufacturers recommend using a damp (not wet) cloth pad. If you use water, make sure that the surface is dry before you polish the furniture. As the manufacturer suggests, you should keep the wax completely dry. Then use a clean cloth to wipe the wax layer hard and wipe off the excess wax. When the wax layer is uniform, polish it with a clean cloth. As above, apply two to three layers of wax to complete the surface finishing work. When you apply a layer of wax, you should completely polish each layer before. How to apply primer colorant Before applying the primer colorant, you must properly prepare and polish the wood, and no additional preparation is required. Mix the primer colorant evenly. Use a clean brush or cloth to spread the colorant evenly along the wood grain and leave it for 10 to 15 minutes; then wipe off the excess with a clean cloth. Allow the wood to dry for 24 hours, then apply a second layer of colorant as above. To finish the finish, you should apply two to three layers of solid wax as above. Then thoroughly polish each layer of wax with a clean cloth. For more information, please stay tuned to http:// Xianghe Furniture City official website Automatic hair curlers have replaced the conventional curling irons. An automatic Hair Curler is an advanced curling iron that uses motors that wraps your around ceramic rod, and the ceramic rod will instantly heat your hair for long-lasting curls. Automatic Curler,Automatic Hair Curler,Electric Hair Curler,Automatic Curling Iron Ningbo Meirou Electric Appliance Co.,Ltd. , https://www.mrhotairbrush.com
There are so many hair curlers available with different features and prices. Selecting the best is difficult, so to help you with that problem.